Educational Blog | Oil & Gas

Request A Quote: (719) 382-9300 | kkaleps@rmbproducts.com

Educational Blog

Home ›› Educational Blog

View by Topic:

All Posts (53)

Posted: April 19, 2024 by Kira Kaleps
Tags: Chemical, Oil & Gas, Rotational Lining, Water Handling, Corrosion Protection, News

Ready Response: RMB Solutions Help Ease Emergencies

Colorful language might be the initial, gut instinct reaction to a leak or failure at the job site. The next step requires finding a solution — and fast. Across industries, companies can suffer...

READ MORE

Posted: April 13, 2022 by RMB Products
Tags: Oil & Gas, Corrosion Protection, Engineering, Biofouling Prevention

How to Prevent Microbiologically Influenced Corrosion in the Oil and Gas Industry

Engineers in the oil and gas industry know that small things can add up to big problems. A good case in point is the corrosion of pipes and process vessels caused by tiny bacteria. Layers of bacteria...

READ MORE

Posted: September 12, 2019 by RMB Products
Tags: Desalination, Chemical, Oil & Gas, Power Generation, Rotational Lining, Water Handling, Corrosion Protection, Mining & Fracking, News

A Better Alternative to Fusion Bonded Epoxy for Corrosion Protection

Fusion bonded epoxy (FBE) coatings have been a widely used method of corrosion prevention for pipeline fittings in oil and gas, chemical processing, and other harsh environment industries since their...

READ MORE

Posted: September 9, 2019 by RMB Products
Tags: Desalination, Chemical, Oil & Gas, Power Generation, Rotational Lining, Water Handling, Corrosion Protection, Mining & Fracking, Process Management

What Standards Can Be Applied to Rotational Lining?

There is not an ASTM standard for rotational lining of pipe and vessels. How can I ensure that the rotational lining will be properly installed by the contractor?

READ MORE

Posted: September 9, 2019 by RMB Products
Tags: Desalination, Chemical, Oil & Gas, Power Generation, Rotational Lining, Water Handling, Corrosion Protection, Mining & Fracking

What Makes Rotational Lining Stand Out Among Other Technologies?

Rotational lining is a process where a liner is applied via a rotational molding process. However, a pipe, vessel, header, pump, etc. acts as the mold, and the liner is fully bonded to the metal...

READ MORE

Posted: September 9, 2019 by RMB Products
Tags: Desalination, Chemical, Oil & Gas, Power Generation, Rotational Lining, Water Handling, Corrosion Protection, Mining & Fracking

What Information Is Needed to Quote an RMB Corrosion Protection Project?

Before we quote a project, we like to know find out what your needs are so we can give you the best solution possible. Below are some of the questions we ask and the reasons behind them.

READ MORE

Posted: September 9, 2019 by RMB Products
Tags: Oil & Gas, Rotational Lining, Corrosion Protection

Eliminating the Failure Modes of Coatings in Brine Pipeline Applications

It is not uncommon for epoxy-coated fittings to fail within 1 year of service in brine pipeline applications. Average service life is likely 5 to 7 years. What if there was a way to increase service...

READ MORE

Posted: September 12, 2017 by RMB Products
Tags: Chemical, Oil & Gas, Power Generation, Rotational Lining, Water Handling, Corrosion Protection, Process Management

Rotational Lining (Rotolining) Benefits vs Alternative Technologies

Rotolining is used to install fully bonded, seamless liners in piping or process equipment. It is corrosion and abrasion resistant for chemical services. The process works by rotating the part in an...

READ MORE

Posted: September 12, 2015 by RMB Products
Tags: Chemical, Oil & Gas, Power Generation, Rotational Lining, Water Handling, Corrosion Protection

Tips, Tricks, and Traps in Corrosion Protection Lining Technology

Every process engineer faced with choosing the best corrosion protection approach for their fluid handling systems faces the classic engineering question of how to balance cost with performance....

READ MORE