Best Methods to Prevent Seam Weld Corrosion

Welded seams within vessels or components utilized in chemical processing, oil and gas recovery, or mining can be more susceptible to corrosion than the adjacent base metals that comprise the body of...  

READ MORE

How to Prevent Microbiologically Influenced Corrosion in the Oil and Gas Industry

Engineers in the oil and gas industry know that small things can add up to big problems. A good case in point is the corrosion of pipes and process vessels caused by tiny bacteria. Layers of bacteria...  

READ MORE

Who Is the Leader in Rotolining?

When you want the highest quality rotational lining of equipment and pipes for corrosion prevention, you need an experienced industry expert you can trust—and, in a competitive industry, that trust...  

READ MORE

6 Ways That Rotational Lining Is Better Than Sheet Lining

Managers at a vinyl chloride monomer plant were worried. They knew their stripping column was leaking, and corrosion was visible from the outside. Upon inspection, they could see that the...  

READ MORE

A Better Alternative to Fusion Bonded Epoxy for Corrosion Protection

Fusion bonded epoxy (FBE) coatings have been a widely used method of corrosion prevention for pipeline fittings in oil and gas, chemical processing, and other harsh environment industries since their...  

READ MORE

What Standards Can Be Applied to Rotational Lining?

There is not an ASTM standard for rotational lining of pipe and vessels. How can I ensure that the rotational lining will be properly installed by the contractor?  

READ MORE

What Makes Rotational Lining Stand Out Among Other Technologies?

Rotational lining is a process where a liner is applied via a rotational molding process. However, a pipe, vessel, header, pump, etc. acts as the mold, and the liner is fully bonded to the metal...  

READ MORE

What is Quality at the Source?

Quality at the Source, or QATS, is the lean manufacturing concept that measures quality at every step of the manufacturing process, rather than waiting until the last step to do a quality check.  

READ MORE

What Information Is Needed to Quote an RMB Corrosion Protection Project?

Before we quote a project, we like to know find out what your needs are so we can give you the best solution possible. Below are some of the questions we ask and the reasons behind them.  

READ MORE

Eliminating the Failure Modes of Coatings in Brine Pipeline Applications

It is not uncommon for epoxy-coated fittings to fail within 1 year of service in brine pipeline applications. Average service life is likely 5 to 7 years. What if there was a way to increase service...  

READ MORE

Rotational Lining for Chemical Processing

APPLICATION Rotational lining of metal structures  

READ MORE

Rotational Lining (Rotolining) Benefits vs Alternative Technologies

Rotolining is used to install fully bonded, seamless liners in piping or process equipment. It is corrosion and abrasion resistant for chemical services. The process works by rotating the part in an...  

READ MORE

Tips, Tricks, and Traps in Corrosion Protection Lining Technology

Every process engineer faced with choosing the best corrosion protection approach for their fluid handling systems faces the classic engineering question of how to balance cost with performance....  

READ MORE

ETFE Lined Pressure Vessels for the Semiconductor Industry

APPLICATION Fluoropolymer (ETFE) lined pressure vessels  

READ MORE